Multimeter Accessories near Dublin 1 : getlocal.ie

Carrying case for measuring instruments

Carry Case For Measuring Board

This is a standard single rod type inside micrometer (individual unit), with the following features: Standard single rod. Carbide measuring faces. Features Digital/Analog: Ana...

Ireland's LocalComparison Directory

Your Gateway To 1,982,249 Offers From Businesses Around Ireland

Multimeter Accessories near Dublin 1 & Discover Local Offers in Ireland

Multimeter Accessories 73 Offer(s)

Carry Case For Measuring Board

Tubular Inside Micrometer 550-575mm 133-163

Tubular Inside Micrometer 8-9" 133-229

Micrometer Head, Locking Screw Type 0-6,5mm, 0,01mm, Flat 148-220-10

Micrometer Head Non-rotating Spindle 0-25mm, 0,01mm 153-203

Starrett S436.2MCXRLZ Starrett Mechanical Micrometer Sets EDP Number : 12776 Range : 0-150mm Graduation : .01mm Set Includes : 25, 50, 75, 100, 125 & 150mm Micrometers with Five Standards in Case

Starrett Mechanical Micrometer 75-100mm x .01mm 436.1MXRL-100

Starrett 263ML 0 - 25 mm Plain Micrometer head ( 12.7 mm dia. )

Inspec Screw Thread micrometer Measuring Tips F0201 for 60-48 TPI

Micrometer Setting Standard Length: 375mm 167-115

Micrometer Setting Standard Length: 15" 167-155

Micrometer Setting Standard Length: 18" 167-158

Micrometer Head, Medium-sized Type with D=8mm Spindle, 0-1", 0,001", Flat, with Spindle Lock, w/o Ratched 151-241-10

Micrometer Head, Medium-sized Type with D=8mm Spindle, 0-25mm, 0,01mm, Flat, with Clamp Nut/Spindle Lock, w/o Ratched 151-226-10

Mitutoyo 516-334-22 Micrometer Check Set Description : Mitutoyo 9 Piece Micrometer Check set, Imperial. Set Consists off: .0625, .100, .125, .200, .250, .300, .500, 1, 2” • Optical parallel (t = .5")

Screw Thread Micrometer 0-25mm, 2-3mm/13-9 TPI 125-104

Micrometer Head, Medium-sized Standard 0-1", Clamp Nut 150-207

Micrometer Ratchet Stop Plastic for Analog Micrometer 0-300 mm, Green, Item number: 985076

Micrometer Head Non-rotating Spindle 0-15mm 153-101

Micrometer Head, Spindle Feed 0,1mm/rev. 0-6,5mm, 0,002mm, Spherical, with Clamp Nut 148-343-10

Mitutoyo Depth Micrometer, Interchangeable Rods 0-300mm, 63mm Base 129-152

Sheet Metal Micrometer Graduated Dial 0-25mm, 50mm Throat 119-202

Micromar Bore Micrometer Set 6-12mm 4190350

Metric Analogue Outside Micrometer Set 0-75mm 103-927-10

Micrometer Head, Differential Screw 0-0,5", 0,001/0,00002", Sperical 110-504-10

Micrometer Head, Differential Screw 0-1mm, 0,001mm, Spherical110-107-10

Sheet Metal Micrometer 0-25mm, 50mm Throat 119-129

Screw Thread Micrometer Interchangeable Tips, 175-200mm 126-132

Starrett Mechanical Depth Micrometer Graduation: .01mm Range: 0-150mm Base Length: 63.5mm Code 440MZ-150RL

Starrett Mechanical Depth Micrometer Graduation: .01mm Range: 0-75mm Base Length: 63.5mm Code 440MZ-75RL

Micrometer Setting Standard Length: 12" 167-152

Micrometer Head, Spindle Feed 0,1mm/rev. 0-6,5mm, 0,002mm, Spherical 148-342-10

Micrometer Head Non-rotating Spindle 0-0,5" 153-108

Micrometer Setting Standard Length: 1250mm 167-374

Tubular Inside Micrometer 900-925mm 133-177

Tubular Inside Micrometer 775-800mm 133-172

Micrometer Head, Differential Screw 0-0,05" 110-112

Inspec 315-07-070 3 Point micrometers Accuracy:.004mm Graduation:.005mm Range: 25-30mm

Tubular Inside Micrometer 700-725mm 133-169

Mitutoyo 3-Point Internal Micrometer Holtest 20-25mm 368-766

Micrometer Stand, 45° Angle Type for Micrometer 0-50mm/0-2" 156-105-10

Micrometers Mahr Federal 4134903 40A Micrometer, 3-4"

Micrometer Head, Locking Screw Type 0-6,5mm, 0,01mm, Spherical 148-222-10

Micrometer Head, Medium-sized Standard 0-25mm, Clamp Nut Reverse Reading 150-822

Micrometer Head, Carbide Tipped Spindle Standard Type, 0-0,5", 0,001", Spherical, with Clamp Nut 149-812-10

Micrometer Head, Medium-sized Type with D=8mm Spindle, 0-1", 0,0001", Flat, with Spindle Lock, w/o Ratched 151-243-10

Mitutoyo Disc Micrometer, Hardened Steel Disks 50-75mm, Disk=20mm 123-103

Mitutoyo 3-Point Internal Micrometer Holtest Set 6-12mm 368-911

Inspec 315-05-070 3 Point micrometers Accuracy:.004mm Graduation:.005mm Range: 16-20mm

Micrometer Setting Standard Length: 1025mm 167-365

Micrometer Setting Standard Length: 40" 167-180

Micrometer Setting Standard Length: 38" 167-178

Micrometer Setting Standard Length: 1000m 167-140

Micrometer Head, Medium-sized Type Standard Type, 0-25mm, 0,01mm, Flat, w/o Ratched 150-196-10

Mitutoyo 3-Point Internal Micrometer Holtest 25-30mm 368-767

Mitutoyo Depth Micrometer Carbide Tipped Rod 0-25mm, 101mm Base 128-104

Micrometer Head, Ultra Small Type 0-6.5mm, 0.01mm, Spherical, with Clamp Nut 148-207-10

Micrometer Head, Carbide Tipped Spindle Standard Type, 0-0,5", 0,001", Flat, Rev. Reading 149-831-10

Micrometer Head, Carbide Tipped Spindle Standard Type, 0-15mm, 0,01mm, Spherical 149-801-10

Micrometer Head, Differential Screw 0-2,5mm 110-102

Related Searches

Let's Support Local & Get Ireland Selling Online. We are offering registered Irish businesses and affordable way to start selling online - Find Out How

About

Services

Links

Discover More

To search by distance please choose your location

Ireland's Local
Comparison Directory